Difference between revisions of "80mm field gun"
m |
|||
| Line 50: | Line 50: | ||
| align=center colspan=2 | | | align=center colspan=2 | | ||
|} | |} | ||
| + | |||
| + | The '''80mm field gun''' is a quick-firing field artillery piece. It was the first artillery piece which was developed by [[Heimat Industries]]. | ||
| + | |||
| + | |||
| + | == Description of the hydro-pneumatic recoil mechanism == | ||
| + | The gun's barrel slid back on rollers, including a set at the muzzle, when the shot is fired. The barrel is attached near the breech to a piston rod extending into an oil-filled cylinder placed just underneath the gun. When the barrel recoiled, the piston is pulled back by the barrel's recoil and thus pushes the oil through a small orifice and into a second cylinder placed underneath. | ||
| + | |||
| + | That second cylinder contains a freely floating piston which separates the surging oil from a confined volume of compressed air. | ||
| + | |||
| + | During the barrel's recoil the floating piston being pressed forward by the surging oil, compresses the air even further inside the confined volume. This action absorbs the recoil progressively as the internal air pressure rose and, at the end of recoil, generates a strong but decreasing back pressure that returns the gun forward to its original position. | ||
| + | |||
[[category:Heimat Industries]] | [[category:Heimat Industries]] | ||
Revision as of 20:58, 29 January 2012
| |
| |
| Type: | Regimental artillery field gun |
| Place of origin: | Kildare, Shireroth |
|
| |
| In service: | 4558 ASC - present |
| Used by: |
  |
|
| |
| Designed: | 4556 - 4558 ASC |
| Manufacturer: | Heimat Industries |
|
| |
| Weight: | 1,566 kg |
| Barrel length: | 2.80m |
| Crew: | 6 |
| Shell: | 80 x 350 mm |
| Caliber: | 80 mm |
| Carriage: | 6 Horse Team,
Artillery tractor |
| Rate of fire: | 14 RPM |
| Effective range: | 18,000 m |
| Maximum range: | 18,500 m |
The 80mm field gun is a quick-firing field artillery piece. It was the first artillery piece which was developed by Heimat Industries.
Description of the hydro-pneumatic recoil mechanism
The gun's barrel slid back on rollers, including a set at the muzzle, when the shot is fired. The barrel is attached near the breech to a piston rod extending into an oil-filled cylinder placed just underneath the gun. When the barrel recoiled, the piston is pulled back by the barrel's recoil and thus pushes the oil through a small orifice and into a second cylinder placed underneath.
That second cylinder contains a freely floating piston which separates the surging oil from a confined volume of compressed air.
During the barrel's recoil the floating piston being pressed forward by the surging oil, compresses the air even further inside the confined volume. This action absorbs the recoil progressively as the internal air pressure rose and, at the end of recoil, generates a strong but decreasing back pressure that returns the gun forward to its original position.
